| Type: | Signal Repeater |
|---|---|
| Transmission Medium: | Cable |
| Standard: | Standard |
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier
General
The 850/900/2100MHz Pico Repeater provides an affordable solution to solve the indoor signal coverage problems due to signal fading and attenuation caused by architecture obstacles. And its easy installation and maintenance can help carrier get fast return.
The repeater is working as a relay between the BTS and mobiles. It picks up the strongest signal from BTS via the Donor Antenna, linearly amplifies the signal and then retransmits it via the Indoor Signal Distribution System to the weak/blind coverage area. And the mobile signal is also amplified and retransmitted to the BTS via the opposite direction.
Technical Specifications
|
SPECIFICATIONS
|
PARAMETERS
|
||
|
Frequency Range
|
CDMA 850MHz
|
825-835MHz/870-880MHz
|
|
|
|
GSM 900MHz
|
890-915MHz/935-960MHz
|
|
|
|
WCDMA 2100MHz
|
1920-1980MHz/2110-2170MHz
|
|
|
Band Width
|
CDMA 850MHz
|
10MHz
|
|
|
|
GSM 900MHz
|
25MHz
|
|
|
|
WCDMA 2100MHz
|
60MHz
|
|
|
Gain
|
65±3dB
|
||
|
Automatic Gain Control
|
31dB
|
||
|
MGC (Step Attenuation)
|
31dB@ 1dB/Step
|
||
|
Output Power
|
20±2dBm
|
||
|
Spurious Emission
|
9 kHz -150 kHz/1kHz
|
≤-36dBm
|
|
|
|
150kHz-30MHz/10kHz
|
≤-36dBm
|
|
|
|
30 MHz-1GHz/100kHz
|
≤-36dBm
|
|
|
|
1GHz-12.75GHz/1MHz
|
≤-30dBm
|
|
|
ACPR
|
Uplink Fully comply with 3GPP 36.106
|
||
|
|
Downlink Fully comply with 3GPP 36.106
|
||
|
Unwanted emissions
|
Fully comply with 3GPP 36.106
|
||
|
VSWR
|
≤2
|
||
|
Ripple
|
CDMA 850MHz
|
≤6dB
|
|
|
|
GSM 900MHz
|
≤6dB
|
|
|
|
WCDMA 2100MHz
|
≤6dB
|
|
|
Noise Figure
|
≤7dB
|
||
|
Delay
|
≤1μs
|
||
|
I/O Impedance
|
50Q
|
||
|
RF Connector(Customers to Choose)
|
SMA-Type (Female)
|
||
|
Operating Temperature
|
-25°~+55°
|
||
|
Power Supply
|
DC 5V
|
||
|
Power consumption
|
≤75W
|
||
|
Environment Conditions
|
IP43
|
||
|
Humidity
|
≤90%
|
||
|
Weight
|
0.5kg
|
||
|
Size
|
205*165*45mm
|
||
Selling Point
. Support the network extension coverage of NSA and SA networking mode at the same time
. MIMO dual channel input and output to improve system capacity and energy efficiency
. Isolation detection of donor and retransmission antenna
. Large AGC range
. High speed digital ALC
. Output power indication
. Automatic Dormancy
. When the equipment is self-excited, it will turn off automatically
. Unique equipment uplink squelch function, which does not interfere with the base station
. Automatic balance of uplink and downlink gain
. Small size, light weight, beautiful appearance, high gain and low power consumption
. Different output power levels to meet different coverage requirements
. Low noise amplification of equipment to improve voice quality and reduce dropped calls
. Convenient installation and opening
.
Item Descrption
Applications:
To expand signal coverage or fill signal blind area where signal is weak or unavailable.
Indoor: Hotels, exhibition centers, basements, shopping malls, offices, parking lots, …
Company introduction
Shenzhen ATNJ Communication Technology Company was founded in Nanshan District, Shenzhen in 2010 with over 900sqm factory. ATNJ focuses on the production and development of micro power signal booster, wireless signal repeater, Indoor Signal Distribution System and antenna series. With professional engineers, workers and with senior management personnel, the group maintains high-speed development.
Meanwhile, the Up-to-date facilities and technology end sure the business long-term development. With the rapid development of the company, ATNJ moved to Guangming District, Shenzhen in 2016 with a bigger factory over 2800sqm and over 50 workers.
In its stage of rapid development, ATNJ advertised its products by attending trade exhibitions oversea, cooperating with many platforms like Made-in-China, Alibaba, Global Sources and so on. Especially, ATNJ attended Mobile World Congress in Spain, which made ATNJ well known in the world and through MWC, ATNJ started to cooperate with many oversea companies.
Nowadays, ATNJ not only produces and develops high-quality home use signal booster and high power wireless repeater, but also expands its business scope to cooperate with signal operators, provide signal coverage solution for large area like residential area, office building, supermarket, underground garage and rural areas.
With the populization of signal repeater, users have more requirements for the functions of the signal repeater. In 2020, ATNJ developed smarter digital module signal repeater with WIFI connection monitoring function, with which users could control the signal repeater and watch the siganl repeater working situation with their mobile phone. Signal repeaters with WAN connection/Bluetooth connection/USB connection were developed at the same time.
In 2021, 5G signal booster was developed and put into Chinese market successfully. In addition, ATNJ starts to upgrade the signal booster from analog module to digital module, with which the products (micro power signal booster, wireless signal repeater, Indoor Signal Distribution System) could be operated and controlled with WIFI connection, WAN port, USB port and SIM card.
What's more, more functions are equipped in our products, like band select, sub bands, OLED screen display, MGC. With the progress of science and technology of ATNJ, easier use and more functional signal boosters have being developed.
We are manufacturer, and have our own factory.
FAQ:
1. Are you trading company or manufacturer ? Could I use our own logo and label?
We are factory, with trading service. We provide OEM/OEM service.
2. Can I have a sample order? What is your MOQ?
Yes, we welcome sample order to test and check quality. MOQ is 1 for normal products.
3: Is it easy to set up your items?
A: Yes. We have a user manual and support technical support 24/7.
4. What is your warranty time?
We promise 3-year warranty for all products shipped from us. Man-made sabotage and natural factors are not within the scope of warranty.
5. Please feel free to contact us if any other questions.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}