High Power 2 Watt 33dBm 5.8GHz WiFi Repeater Amplifier for Use in Mobile and/or Mesh Wireless Networking Applications

• Customization: Available
• Type: Signal Repeater
• Transmission Medium: Cable
• Model NO.: ATNJ58Gi2000P
• Standard: Standard
• Lightning Protection: With Lightning Protection
• Certification: ISO, RoHS, CE
• Condition: New
• Operating Frequency: 5000-5875MHz
• Channel Width: 20MHz&40MHz&80MHz
• Connector Type 1: to Radio N Female (Hole Inside)
• Connector Type 2: to Antenna N Female (Pin Inside)
• Operation Mode: Bi-Directional, Half-Duplex, Time Division Duplex
• Transmit Gain: 15-18dB
• Outside Receiver Gain: 11-14dB
• Repeater Output: 2000MW (33dBm)
• Repeater Input: 0-20dBm
• Network: Wireless LAN, Wired LAN, IP, Poe, WiFi, 4G
• Operating Temperature: -20°c to +70
• Warranty: 3 Years
• Transport Package: 21.3*13.5*5cm
• Specification: Size: 8.4*5.4*2cm, Weight: 94g
• Trademark: ATNJ
• Origin: Shenzhen
• HS Code: 8543709200
• Production Capacity: 10000/Per Month

Product Description

 

Technical Specifications:
 

SPECIFICATIONS		PARAMETERS
Booster Model		ATNJ58Gi2000P
Operating range		5000-5875MHz
Channel width		20Mhz&40Mhz&80Mhz
Supported standards		IEEE 802.11a/n
Operation mode		Bi-directional, half-duplex, time division duplex
Connector type		To radio N female (hole inside)
To antenna		N female (pin inside)
Output power		2000mW (33dBm)
Input power		0 - 20dBm
Transmit gain		15 - 18dB
Receiver gain		11 - 14dB
Noise figure		≤3.5dB typical
Frequency response		±1dB over operating range
Operating temperature		-20°C to +70°C
Operating humidity		Up to 75% relative humidity
Material		Cast aluminum
LED light		Power status LED and activity status LED
Booster weight		110g
Booster size		8.4 x 5.4 x 2cm

ATNJ's family of WiFi boosters is designed for use in mobile and/or mesh wireless networking applications. Designed for bi-directional signal amplification, In contrast, traditional analog amplifier technologies can go into saturation or reduce transmit power as input signal fluctuates, negatively impacting signal quality and network performance. Can be used any 5GHz antenna that implements an N-Male connector. The small footprint and low profile design makes it an ideal solution for mounting on vehicles or in other space constrained applications.
 

Selling Point

1. 5.8GHz, Max. 2000mW output power.

2. Aluminum-alloy case by CNC, anti-interference.
3. Small size, Safe & Power saving.
4. Full kit, easy to install.
5. For house, office, UAV, IP cameras, RC equipment.

 

 Company introduction

Shenzhen ATNJ Communication Technology Company was founded in Nanshan District, Shenzhen in 2010 with over 900sqm factory. ATNJ focuses on the production and development of micro power signal booster, wireless signal repeater, Indoor Signal Distribution System and antenna series. With professional engineers, workers and with senior management personnel, the group maintains high-speed development.

Meanwhile, the Up-to-date facilities and technology end sure the business long-term development. With the rapid development of the company, ATNJ moved to Guangming District, Shenzhen in 2016 with a bigger factory over 2800sqm and over 50 workers.

In its stage of rapid development, ATNJ advertised its products by attending trade exhibitions oversea, cooperating with many platforms like Made-in-China, ******, Global Sources and so on. Especially, ATNJ attended Mobile World Congress in Spain, which made ATNJ well known in the world and through MWC, ATNJ started to cooperate with many oversea companies.

Nowadays, ATNJ not only produces and develops high-quality home use signal booster and high power wireless repeater, but also expands its business scope to cooperate with signal operators, provide signal coverage solution for large area like residential area, office building, supermarket, underground garage and rural areas.

With the populization of signal repeater, users have more requirements for the functions of the signal repeater. In 2020, ATNJ developed smarter digital module signal repeater with WIFI connection monitoring function, with which users could control the signal repeater and watch the siganl repeater working situation with their mobile phone. Signal repeaters with WAN connection/Bluetooth connection/USB connection were developed at the same time.

In 2021, 5G signal booster was developed and put into Chinese market successfully. In addition, ATNJ starts to upgrade the signal booster from analog module to digital module, with which the products (micro power signal booster, wireless signal repeater, Indoor Signal Distribution System) could be operated and controlled with WIFI connection, WAN port, USB port and SIM card.

What's more, more functions are equipped in our products, like band select, sub bands, OLED screen display, MGC. With the progress of science and technology of ATNJ, easier use and more functional signal boosters have being developed.

Shipping

1. We will send your parcel as soon as possible after payment confirmed within 48 hours.
2. Please provide your correct address,full name,and zip code.
3. We generally would declare the parcel with lower value to avoid or lessen the Customs Tax.Import Tax is not including in the price. When it happens, it is buyers responsibility to pay for the tax and custom clearance.
4. Shipping is out of our control. If you want to get the product fast, please choose fast shipping methods, like Fedex, UPS and DHL. If you find the package is beyond promised delivered time, please contact us, we will contact with the carriers and find out the reason.

 

ATNJ Strength & Service

Highly qualified communication technology Engineers. ATNJ brings together a team of engineers with more than ten years of working experience in communication industry, who are engaged in signal booster R&D, design, debugging, testing, and its pre-production to ensure it could comply with International Standards. For the sustainable development of the company, some young engineers are also employed. Because of their hard work, the ATNJ's products can be continuously updated and iterated.
 

Satisfactory after-sales service. ATNJ provides 3-year warranty for all the main signal repeater, and 3-month warranty for accessories. Within the warranty period, ATNJ provides free repairment service, and customers only need to pay for the freight. In addition, within one month after the customer receives the product, ATNJ is responsible for all non-human damage faults.

Contact us and place order now, to have better signal, better life.

FAQ

1. Are you trading company or manufacturer ? Could I use our own logo and label?

We are the factory, with good trading service. We provide OEM/OEM service.

2. Can I have a sample order? What is your MOQ?
Yes, we welcome sample order to test and check quality. MOQ is 1 for normal products.

3. Is it easy to set up your items?
Yes. We have a user manual and support technical support 24/7.

4. What is your warranty time?
We promise 3-year warranty for all products shipped from us. Man-made sabotage and natural factors are not within the scope of warranty.

5. Please feel free to contact us if there are any other questions.